profile: 3.0 x 4.5 cm
side length 20 - 300 cm
custom formats possible on request
`sharp edge' possible on request
The K30 has a profile of 3.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 20 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge of 5 euros per bar.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/de/malgruende/keilrahmen/holz-keilrahmen/910/keile-standard-kiefer-100-stueck?number=10864
If you require an additional bracing, please combine the frame with the cross bars K30: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/32/keilrahmen-mittelstueck-k30-1-8-x-4-5cm?number=10032The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).
Content:
1.85 Laufende(r) Meter
(€1.54* / 1 Laufende(r) Meter)
profile: 6.5 x 7.0 cm
side length 70 - 400 cm
custom formats upon request
sharp edge as standard
from 3 m 3-fold slotted, from 4 m 4-fold slotted
Production on special order.Waiting time 7-14 days.
The K 6570 has a profile of 6.5 x 7.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 70 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a sharp edge as standard.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/918/wedges-big-k70/keys-50pcs.?number=10872
If you require an additional bracing, please combine the frame with the cross bars K6570: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/17/cross-brace-for-k70-and-k6570-7-0x4-5cm
The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm, a 2-fold slit from a side length of 200 cm, a 3-fold slit with a side length of 300 cm and a 4-fold slit with a side length of 400 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). With this profile, bars are triple slotted over 3m length and quadruple slotted over 4m length. Please select the appropriate number of middle pieces.
Content:
0.7 Laufende(r) Meter
(€16.00* / 1 Laufende(r) Meter)
The middle bars K2065 are suitable for stretcher frames K2065.
Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there.
Content:
0.3 Laufende(r) Meter
(€4.00* / 1 Laufende(r) Meter)
from 50 cm lengthone slit, i.e. a middle bars or a cross: from 2 m lengthtwo slots,i.e. two middle bars per side or a double double cross:
Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there.
Content:
0.45 Laufende(r) Meter
(€0.93* / 1 Laufende(r) Meter)
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.
Our aluminium and wood combo frame is an answer to the demand of our customers for a particularly stable solution for large formats. In years of dialogue with our customers, we have developed a unique product that meets the demand for optimum stability, precise stretching and, at the same time, easy handling thanks to its particularly low weight.The frame is made of 100% solid aluminium and a wooden strip on the back, which makes a simple covering with different painting grounds possible. Each frame has a corner reinforcement as standard and, depending on the size of the frame, is additionally reinforced with a centre piece, a single cross or a double cross. Up to a side length of 6 m we manufacture the frames flexibly in all desired formats with millimetre precision.On request, deeper profiles are also possible by attaching additional wooden strips.All the advantages of our aluminium- wood- combo-frames at a glance:
optimal stability
distortion-free under unfavourable room, transport and storage conditions
particularly low weight: easy to transport and handle
precise and easy retensioning with an allen key
longevity
flexible format selection in millimetre steps up to 6 m page length
custom profiles possible
easy to cover thanks to the wooden strip on the back side
differing profiles upon request
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
Content:
0.16 Quadrat Meter
(€187.50* / 1 Quadrat Meter)
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.*
Our wooden profile aluminium system frame is an answer to the demand of our customers for a particularly stable solution for large formats: a unique product that meets the demand for optimum stability, precise covering and, at the same time, easy handling due to particularly low weight and simple installation.The frame consists of a wooden profile of 45 mm on the outside and an inner frame of 100% solid aluminium. The wooden profile makes the covering with different painting grounds as simple as usual. Each frame has a corner reinforcement as standard and, depending on the size of the format, the frame is additionally reinforced with a centre piece, a single or multiple aluminium cross. The unique assembly system also makes it possible to attach centre pieces at a later date.Hanging the frame is particularly easy due to the hanging lugs or heavy load hangers, which can be attached to the inside of the aluminium profile and easily moved.From a side length of 30 cm, we manufacture the frames flexibly in all desired formats, even from a side length of more than 6 m, with millimetre precision. On request, deeper profiles are also possible by attaching additional wooden strips, which is recommended for formats from 6 m upwards.The delivery time for standard formats is 5-7 days, for special formats 7-10 days. All advantages of our wooden profile aluminium system frames at a glance:
45 mm profile
museum quality thanks to optimum stability and longevity
distortion-free under unfavourable room, transport and storage conditions
particularly low weight: easy to transport and handle
precise and easy retensioning with a 4 mm Allen key
flexible format selection in millimetre steps even with a page length of over 6 m
easy to cover thanks to the wooden profile
easy installation thanks to the ingenious system with just one Allen key
environmentally friendly thanks to the use of PEFC-certified wood
assembly instructions on Youtube: https://www.youtube.com/watch?time_continue=3&v=Qb0X23aRuTk
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
unbespannte Dreiecke / Einrahmung:
gleichschenklig, Höhe 21cm, Breite 42cm
Unsere Dreiecke werden aus Tischlerplatte* hergestellt. Der Rahmen ist insgesamt 18 mm Tief, 12 mm Rahmenstärke plus 5 mm Kante.
*Tischlerplatte ist aufgrund seiner geringen Rohdichte sehr leicht und selbst bei schwankenden Klimaeinflüssen formstabil, biegesteif und besitzt ein hohes Stehvermögen, d.h. verformt sich nur wenig.
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.*
Alu Frame 52 x 27 mm
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.*
Alu Frame 52 x 40 mm
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.*
Alu Frame 52 x 50 mm
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
profile: 10.0 x 7.0 cm
side length 100 - 500 cm
custom formats upon request
sharp edge as standard
from 3 m 3-fold slotted, from 4 m 4-fold slotted
The K 10070 has a profile of 10.0 x 7.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 100 to 500 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a sharp edge as standard.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/918/wedges-big-k70/keys-50pcs.?number=10872
If you require an additional bracing, please combine the frame with the cross bars K70: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/17/cross-brace-for-k70-and-k6570-7-0x4-5cm?number=10017
The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm, a 2-fold slit from a side length of 200 cm, a 3-fold slit with a side length of 300 cm and a 4-fold slit from a side length of 400 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). With this profile, bars are triple slotted over 3m length and quadruple slotted from 4m length. Please select the appropriate number of middle bars.
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.
Our wooden profile aluminium system frame is an answer to the demand of our customers for a particularly stable solution for large formats: a unique product that meets the demand for optimum stability, precise covering and, at the same time, easy handling due to particularly low weight and simple installation.The frame consists of a wooden profile of 45 mm on the outside and an inner frame of 100% solid aluminium. The wooden profile makes the covering with different painting grounds as simple as usual. Each frame has a corner reinforcement as standard and, depending on the size of the format, the frame is additionally reinforced with a centre piece, a single or multiple aluminium cross. The unique assembly system also makes it possible to attach centre pieces at a later date.Hanging the frame is particularly easy due to the hanging lugs or heavy load hangers, which can be attached to the inside of the aluminium profile and easily moved.From a side length of 30 cm, we manufacture the frames flexibly in all desired formats, even from a side length of more than 6 m, with millimetre precision. On request, deeper profiles are also possible by attaching additional wooden strips, which is recommended for formats from 6 m upwards.The delivery time for standard formats is 5-7 days, for special formats 7-10 days. All advantages of our wooden profile aluminium system frames at a glance:
25 mm profile
museum quality thanks to optimum stability and longevity
distortion-free under unfavourable room, transport and storage conditions
particularly low weight: easy to transport and handle
precise and easy retensioning with a 4 mm Allen key
flexible format selection in millimetre steps even with a page length of over 6 m
easy to cover thanks to the wooden profile
easy installation thanks to the ingenious system with just one Allen key
environmentally friendly thanks to the use of PEFC-certified wood
assembly instructions on Youtube:https://www.youtube.com/watch?time_continue=3&v=Qb0X23aRuTk
*Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.
Our new stretcher bar innovation: the Museo 65 has a profile of 65 x 44 mm and is almost distortion-free thanks to multiple gluing.The recipe for success lies in the use of first-class materials and processing techniques. For the stretcher bar we use seasoned and kiln-dried 100% PEFC-certified pine wood. The wood is double laminated to protect it from absorbing humidity from the air and finger-jointed to prevent the natural tendency of the wood to warp.The 10 mm high edge guarantees a large distance between the screen and the last surface. The reinforcing cross is placed quite far back so that there is also a large distance to the screen.The stretcher frame is available from a side length of 20 to 600 cm. We are happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the centre pieces must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible for an extra charge of 5 euros per bar.If you wish a bracing, please combine the frame with the cross brace K60 https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/30/cross-brace-k60?number=10030
The stretcher bar has a 1-fold slit ex works from a side length of 60 cm to a side length of 195 cm and a 2-fold slit up to a side length of 300 cm.The hardwood wedges required for wedging (2 pieces per bar) are not included in the price. Please order https://peters-art.de/de/malgruende/keilrahmen/holz-keilrahmen/991/keile-gross-buche-50-stueck?number=10939=10939
profile of 65 x 44 mm
virtually distortion- free
extremely stable
has a 3D effect
high distance to the stretcher bar surface thanks to high edge
side length 20 - 600 cm possible
custom formats possible
`sharp edge' possible
PEFC-certified pine wood
Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).
1 m to 2 m = 1 middle bar
2.1 m to 3 m = 2 middle bars
3.1 m to 4 m = 3 middle bars
K70 Connectors for extended lengthsThe stretcher frame K70 is available from a side length of 30 to 500 cm, if you want to work with a length of more than 5 m you need the connecting piece offered here.With the connection made of aluminium, 2 strips are combined to an extended length. One connecting piece is necessary for the strecher bars. To extend a cross brace, 2 connectors are required, because they are installed on both sides. (see picture)
Profil 3,2 x 6,0 cm, Nr.3060
ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.* profil 3,2 x 6,0 cm, No. 3260 Our aluminium and wood combo frame is an answer to the demand of our customers for a particularly stable solution for large formats. In years of dialogue with our customers, we have developed a unique product that meets the demand for optimum stability, precise stretching and, at the same time, easy handling thanks to its particularly low weight.The frame is made of 100% solid aluminium and a wooden strip on the back, which makes a simple covering with different painting grounds possible. Each frame has a corner reinforcement as standard and, depending on the size of the frame, is additionally reinforced with a centre piece, a single cross or a double cross. All the advantages of our aluminium- wood- combo-frames at a glance: optimal stability distortion-free under unfavourable room, transport and storage conditions particularly low weight: easy to transport and handle precise and easy retensioning with an allen key longevity easy to cover thanks to the wooden strip on the back side *Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.