Medium 5 („Malbutter“)
Schwach gelbliches Malmittel zum Ermischen von schnelltrocknender, hochelastischer, pastoser Alkydharz-Ölfarbe; trocknet wie „reine“ Ölfarbe terpentinölfest durch; gut verschlossen halten. Hinweis: Bei längerer Lagerung im Dunkeln kann es besonders bei weißen Farbpartien zur - im Licht jedoch reversiblen - Vergilbung des Farbauftrags kommen!
Methoxypropanol PM
propylene glycol dimethylether
Form liquid
Solubility in water completely miscible
Boiling point 119 - 122°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P370+P378: In case of fire: Use sand, dry extinguishing powder or foam for extinction.
P403+P235: Store in a well ventilated place. Keep cool.
Kluthe Verdünner für aromatenfreie Lacke Lösin 600 Verdünner aromatenfrei
Hochwertiger, methanol- und aromatenfreier Verdünner für aromatenfreie Kunstharzlacke. Eigenschaften:
Für aromatenfreie Kunstharzlacke
Fördert den Verlauf
Geruchsarm
Anwendung:
Geeignet zur Verdünnung von aromatenfreien Kunstharzlacken. Die Verdünnung fördert den Verlauf und verhindert selbst bei extrem hoher Luftfeuchtigkeit ein Weißanlaufen oder Mattwerden der Lackierung.
Ein mit Glimmer formuliertes Acrylmedium, das mit Acrylfarben gemischt werden kann, um einen schillernden Glanz zu erzeugen, oder allein aufgetragen werden kann, um einen silbrig schillernden Effekt zu erzielen. UV beständig.
Pine Turpentine
essence, double rectified, DAB 9
Chemical description Turpentine Oil
Inflammation point ca. 220°C
Form liquid
Solubility in water practically insoluble
Boiling point 154 - 170°C
Safety Information
GHS02: Flame
GHS08-2: Health Hazard
GHS09: Environment
Signal word: Danger
Hazard designation
EUH208: May produce an allergic reaction.
H226: Flammable liquid and vapour.
H302: Harmful if swallowed.
H304: May be fatal if swallowed and enters airways.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
H411: Toxic to aquatic life with long lasting effects.
Safety Information
P260c: Do not breathe vapours.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P301+P310: If swallowed: Immediately call a poison center or physician.
P302+P352: If on skin: Wash with soap and water.
P331: Do not induce vomiting.
P333+P313: If skin irritation or rash occurs: Get medical attention.
P501: Dispose of contents/ container according to regional, national and international regulations.
Echtes, reines Balsamterpentinöl höchster Qualität, auch als Produkt im Handel erhältlich. Lösemittel Reinigungsmittel Fleckenentferner – Fleckentferner zum Abschleifen von Gummi Fliegenentferner – Felgenreiniger Möbel- und Holzreiniger – Holzpflegemittel Lederreiniger – zur Lederpflege Fleckentferner / Fleckentferner Fleckenentferner für Öl- und Fettflecken Bleichmittel Entfetter und Reinigungsmittel im Handwerk z Holzverarbeitung/Renovierung Für die Glasverarbeitung Zur Mückenabwehr Als Lockmittel beim Angeln Für Ölmalerei Zum Trocknen Als Duftöl Eines der hochwertigsten, wirksamsten und stärksten Lösemittel auf natürlicher Basis mit frischem, ätherischem Duft, Besonderheit Terpentinöl Balsamisch Öl zeichnet sich durch seine langsame Verdunstung aus – daher ein sehr breites Anwendungsspektrum.Balsamico-Terpentinöl wird seit Jahrhunderten zum Verdünnen von Ölfarben und zum Auflösen von Harzen verwendet. Neben seiner hohen Lösungskraft hat Balsamterpentin viele Vorteile. Im Gegensatz zu erdölbasierten Lösungsmitteln (Erdöldestillaten) verdunstet es langsamer, sodass Lacke oder Ölfarben genügend Zeit haben, in das Holz einzudringen.
Kluthe Lösin® Terpentinersatz
Kluthe Lösin® Terpentinersatz ist ein hochwertiges Reinigungs- und Verdünnungsmittel. Kunstharz- und Öllacke können verdünnt und Arbeitsgeräte, Holz- und Linoleumböden gereinigt werden. Dieses Mittel darf nicht als Kraft- und Heizstoff verwendet werden!
Eigenschaften von Kluthe Lösin® Terpentinersatz
Kluthe Lösin® Terpentinersatz zeichnet sich durch folgende Eigenschaften hervor:
Reinigungsmittel für Arbeitsgeräte
Verdünner für Öl- und Kunstharzlacke
Hochwertig
Langsamflüchtig
Steuerbegünstigtes Mineralöl
Farblos
Flüssig
Methoxypropanol PM
propylene glycol dimethylether
Form liquid
Solubility in water completely miscible
Boiling point 119 - 122°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P370+P378: In case of fire: Use sand, dry extinguishing powder or foam for extinction.
P403+P235: Store in a well ventilated place. Keep cool.
Linseed Oil, cold-pressed
pale yellow, contains some mucilage
For oil paints, tempera, wood treatment.
Chemical description Natural linseed oil
Form liquid
Solubility in water insoluble
Handling and Warnings
CAUTION: Materials impregnated with oil may spontaneously combust (auto-oxidation). Burn rags under supervision or dry outspread.
Highly elastic acrylic emulsion, which adheres on all common grounds and dries with water. After drying, it can be treated with the usual abrasives. Environmentally friendly.
Calcium Carbonate
Order number: 58490
natural, approx. 1 µ, very white
Chemical description Calciumcarbonat
ColorIndex PW 18.77220
Suitability Acrylics, Lime / Fresco, Oil, Tempera, Watercolor / Gouache
Color White
Form powder
Solubility in water 8 mg/l
Dispersion based on methyl methacrylate and butyl acrylate.Produces a tough elastic film and is extremely tensile resistant. Suitable for wet and dry applications. Standard type for doublings and marouflage. Water-dilutable. Film after drying water resistant. Permanently soluble in acetone, alcohol, toluene, xylene, etc.
Bronze medium
for bronze effects
50032
Ready-to-use binder for Schmincke Oil bronzes. For brilliant metallic effects on oil paintings and several other surfaces like wood, metal or gypsum. The gilding remains after drying soluble to turpentine respectively turpentine substitute. (Pre-tests are recommended prior to the application of varnish!)
Thinner: Turpentine substitute (50019)
Handling
Shake well before use.
Mix 3 parts Schmincke oil-bronze and 2 parts bronze medium with a painting knife shortly before application.
The product is ready to use. The mixture can be diluted with e.g. turpentine substitute 50019.
Dries wipe and water-resistant. Colour layer remains soluble to oil of turpentine 50024 / 50102 and turpentine substitute 50019 after getting dry.
Please clean tools like brushes or palettes as soon as possible with e.g. oil of turpentine 50024 / 50102, turpentine substitute 50019 or brush cleaner 50051 / 50052.
When used on absorbent surfaces, we recommend an additional pre-treatment with bronze medium thinned with turpentine substitute 50019.
Can be varnished carefully when dried completely with Universal varnish AEROSPRAY glossy 50590 (oil paintings should dry at least 8 – 12 months before varnishing; pre-tests are required cause the painting layer remains soluble in oil of turpentine / turpentine substitute.)
Only suitable for indoor objects (not for damp rooms!).
Close immediately after use.
Store in a cool and dry place.
Individual pre-tests are required.
Sizes: 60 ml and 200 ml
Contains: cumarone resin, mineral spirit.
Hazard statements
Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Safety precautions
Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing and eye/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Store in a well-ventilated place. Keep container tightly closed.
Other hazardsRepeated exposure may cause skin dryness or cracking.
Ethyl Alcohol
anhydrous, denatured
ATTENTION: Ethyl Alcohol can only be shipped in 1 liter containers with normal shipping methods. Also the shipment of further 1 liter containers is without difficulty. The shipment of 3 liter and 200 liter containers is only possible by a forwarder!
Chemical description Ethanol dehydrated, denatured with 1% MEK
Form liquid
Solubility in water miscible
Boiling point 78°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses and continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P403+P235: Store in a well ventilated place. Keep cool.
P501: Dispose of contents/ container according to regional, national and international regulations.
Shellsol® D 40
Order number: 70471
aroma-free
Boiling point: 145 - 205°C; Not suitable for medical purposes!
Chemical description Mixture of paraffinic and naphthenic hydrocarbons C9-C11.
Form liquid
Solubility in water 0.04 g/l; not miscible
Boiling point 130 - 213°C
Safety Information
GHS02: Flame
GHS08-2: Health Hazard
GHS09: Environment
Signal word: Danger
Hazard designation
EUH066: Repeated exposure may cause skin dryness or cracking.
H226: Flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P273: Avoid release to the environment.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P301+P310: If swallowed: Immediately call a poison center or physician.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P331: Do not induce vomiting.
P403+P235: Store in a well ventilated place. Keep cool.
Aceton
ist eine farblose, aromatisch riechende, feuergefährliche Flüssigkeit. Aceton ist mit Wasser, Alkohol und Äther beliebigmischbar. Aceton löst Fette, Harze, Schellack, Vinylharze, Asphalt, Acetylcellulose, Nitrocellulose, Acetylen.Aceton ist das einfachste Keton.
Verwendung:
Als Lösungsmittel, Extraktions- und Kristallisationsmittel, zum Beispiel in Abbeizmitteln für Öl- und Lackfarben,Lösungsmittel für Acetylcellulose bei Lack- und Acetatseidenfarbrikation, Lösungsmittel für Acetylen, zurKlebemittelherstellung, als Alkoholersatz bei der Entwässerung mikroskopischer Präparate, bei der Synthese vonDiacetonalkohol, Methylisobutylketon, Bromaceton, Chloroform, Jodoform, Sulfonal usw., zur Lösung von ätherischenÖlen, Balsamen, Chlorophyll, Gummen, Harzen usw.
ACHTUNG: Aceton darf über den normalen Versandweg nur als 1 Liter Gebinde verschickt werden! Problemlos ist auch der Versand von mehreren 1 Liter Gebinden in einer Sendung.
flüssig
mischbar
Siedepunkt bei 55.8 - 56.6°C
Chemische Formel: C5H8O2
Kluthe Haku 1025-920 Kaltreiniger 1L
HAKU 1025-Produkte sind halogenkohlenwasserstofffrei. Sie sind geeignet für alle Entfettungs- und Reinigungsarbeiten und besitzen ein ausgezeichnetes Lösevermögen gegenüber tierischen Ölen und Fetten, Teer, Wachsen, Natur- und Kunstharzen. Die Produkte lösen ausgehärtete Anstrichstoffe, die meisten Kunststoffe und Gummi nicht an; besonders geeignet zur Reinigung lackierter oder grundierter Teile. Verbrauchte Kaltreinigungs- und Entfettungsmittel der 1025-Reihe können grundsätzlich analog des Kreislaufwirtschafts- und Abfallgesetzes zur Verwertung zurückgenommen werden.
Blanc Fixe
Order number: 58700
barite, barium sulfate, powder
For heavy opaque colors, lowers oil absorption.
ColorIndex PW 21.77120
Opacity semi-opaque
Suitability Acrylics, Ceramic, Oil, Tempera, Watercolor / Gouache, Silicate binder, Waterglas
Color White
Form powder
Solubility in water insoluble
Chemical Formula Ba(SO4)
CompositionMixture of water and propanediol with acrylic polymerProperties- higher viscosity version of the Retarder whichadded to acrylics extends drying for a very longtime, up to three times as long as the regularRetarder- will change the viscosity of Lascaux Artist Acrylicsonly slightly- adding Lascaux Retarder extends the relativelyshort drying time of acrylic colours on nonporoussupports and keeps paint film open longer: up to acouple of hours- reduces the evaporation rate of the water andenhances the reemulsifying capacity of the paint,i.e. dry paint film containing- the addition of Lascaux Ultra Retarder does notalter the hue of the colourApplications, Directions and NotesSame as Lascaux Retarder.Physiologically and toxicologically safe in conventionalusage. USA: conforms to ASTM D-4236.Sizesbottles of 85 ml, 250 ml and 1 l, plastic buckets of 5 l.
Modern Egg Tempera (Replacement) Medium No. 6
Brownish water-mixable binder for making classical tempera colours (egg yolk
replacement). Addition produces a stable mixture of oil and water colours.
For more details please request a product information sheet at www.lukas.eu or
by phone on ++49 (0) 2 11-78 13-0
alkyd resin, emulsifying agents, balsam turpentine, water, additives
water (turpentine) / dangerous goods /
Lascaux thickener increases the consistency of the ink at high dilutions with water. The good strokes are thus retained. The thickening effect is only ensured in the wet state.increases the viscosity of acrylic paints saves the water content of the colors and thereby extends the opening timeallows a good brushing in the case of very dilute colors when applying glazes and prevents drips The color depth and surface texture of the painting remain unchanged.
Liquid Mask
Used to reserve areas which are to remain unpainted, especially in airbrush techniques, but also with watercolours and temperas. Liquid Mask forms a protective film on the area which the artists does not want to paint. Once the work is dry, liquid mask is rubbed off with an eraser or piece of cloth, revealing unpainted area.
Lascaux Matting AgentCompositionDispersed pyrogenic silicia with acrylic polymer inwaterProperties- used to obtain a matt effect with acrylic paintsand mediums. It contains no binders.- dries to a matt, water-resoluble film- lightfast and age resistandApplications- adding Lascaux Matting Agent gives acrylics a mattappearance similar to that of gouache or temperacolours- likewise, acrylic colours can be prepared forsupplementing or retouching lime and caseinpaintings at any stage- the Matting Agent is only suitable for use withwater-based systems and for interior applicationsDirectionsSlowly add 20-30% Matting Agent to the relevantproducts, stirring all the time. Depending on theamount of the agent added, a certain loss of transparencyis unavoidable. Higher proportions of MattingAgent will proportionaly reduce the binder contentthereby diminishing the waterproofness and scratchresistance of the paint. The Matting Agent shouldtherefore only be used for interior work.NotesPhysiologically and toxicologically safe in conventionalusage. USA: conforms to ASTM D-4236.Sizesbottles of 85 ml, 250 ml and 1 l, plastic buckets of 5 l.
A glass clear liquid which levels itself, even on irregular surfaces, to reproduce the effect of transparent still water. Apply in several fine layers of no more than 3 mm. thickness to prevent cracks or bubbles in the drying process.