Painting Supports

      profile: 2.0 x 4.5 cm     side length 15 - 300 cm     custom formats possible on request     `sharp edge' possible on request The 2045 has a profile of 2.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 15 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/910/standard-wedges/keys-pine-50-pcs If you require an additional bracing, please combine the frame with the cross bars K 45: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/12/cross-brace-k45-and-k40?number=10012The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 50cm no middle bars are needed. If one side length exceeds 50cm, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).

      profile: 2.0 x 3.5 cm     side length 15 - 160 cm     custom formats possible on request     `sharp edge' possible on request The 2035 has a profile of  2.0 x 3.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 15 to 80 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge of 5 euros per bar.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/910/wedges-standard-pine/keys-100pcs?number=10864 If you require an additional bracing, please combine the frame with the cross bars K35: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/34/keilrahmen-mittelstueck-k35-1-8x3-5cm?number=10034The stretcher frame has a 1-fold slit from a side length of 50 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross).  

THE END OF PRODUCTION. ALTERNATIVE MATERIAL:https://peters-art.de/en/detail/018aace01e407169b8e169130644f1cf

    weight after priming: 280g/m²     width: 2.10 m (plus edge)     medium fine texture     especially suitable for smooth surfaces       double primed with slightly absorbent universal primer     brown backside     75 % cotton, 25% polyester     suitable for oil, acrylic, tempera and gouache     ideal for canvas panels and painting boards     price per running meter     10m Roll

    wedges made of pine wood     100 pieces     suitable for stretcher frame K35 and K40     Dimensions 65 x 23 x 4mm

The middle bars 2045 are suitable for both stretcher frames 4045 and 2045.From 50 cm length one slit, i.e. a middle bars or a cross. From 2 m length two slots, i.e. two middle bars per side or a double double cross. Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there.The length of the center element should correspond to the length of the sidebar. Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

The twill weave is characterised by the diagonal, parallel lines (twill ridge) formed by the juxtaposition of the binding points (crossing points of warp and weft). This fabric shows a clear diagonal twill structure on one side and is rather fine on the other. Cotton with twill weave is suitable for all formats, especially for large formats. weight: 280g / m² width: 1.60 m (plus edge) cotton 100% price per running meterRoll 30m    

weight after priming: 410 g/m² weight before priming: 340 g/m² width: 2.10 m (plus edge) half-chalk primer, highly absorbent fine texture heavy fabric with good quality brown backside 100 % cotton suitable for professional painting suitable for oil, acrylic, tempera and gouache price per running meter  

    profile: 4.0 x 4.5 cm     side length 18 - 350 cm     custom formats possible on request     `sharp edge' possible on request The 4045 has a profile of 4.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 18 to 350 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/big-wedges/keys-beech-50-pcs. If you require an additional bracing, please combine the frame with the cross bars K 45: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/12/cross-brace-k45-and-k40?number=10012The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 60cm no middle bars are needed. If one side length exceeds 60cm, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). The length of the center element should correspond to the length of the sidebar. Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

    profile: 2.8 x 4.5 cm     side length 20 - 300 cm     custom formats possible on request     `sharp edge' possible on request The 2845 has a profile of 2.8 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 20 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please orderhttps://peters-art.de/en/Painting-Supports/Stretchers/Wooden-Stretchers/910/STANDARD-wedges/keys-pine-50-pcsIf you require an additional bracing, please combine the frame with the cross bars K30: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/32/keilrahmen-mittelstueck-k30-1-8-x-4-5cm?number=10032The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).The length of the middle bar should correspond to the length of the side strips. Example: for a frame measuring 100x100 cm, you need two middle bars measuring 100 cm (simple cross).

Characteristic for a panama weave, a variant of the plain weave, is the typical cube or chessboard pattern. This unprimed fabric shows a distinct structure on both sides. It is very tear-resistant and therefore suitable for all formats, especially large ones. Weight: 370 g / m² Width: 3.10 m (plus edge) 100 % cotton Price per running meter30m roll  

The twill weave is characterised by the diagonal, parallel lines (twill ridge) formed by the juxtaposition of the binding points (crossing points of warp and weft). This fabric shows a light diagonal twill structure on both sides. Cotton with twill weave is suitable for all, especially large formats. weight: 260g / m² width: 2.10 m (plus edge) 100 % cotton price per running meter30 m bale      

The twill weave is characterised by the diagonal, parallel lines (twill ridge) formed by the juxtaposition of the binding points (crossing points of warp and weft). This fabric shows a clear diagonal twill structure on one side and is rather fine on the other. Cotton with twill weave is suitable for all formats, especially for large formats. weight: 375g / m² width:2.20 m (plus edge) cotton 100% price per running meter50m rollC-Ware

weight after priming: 330 g/m²     weight before priming: 200 g/m²     width: 2.10 m (plus edge)     extra -fine (very smooth surface)  primed with slightly absorbent universal primer     brown backside99% cotton, 1% polyester     suitable for oil, acrylic, tempera and gouache     price per running meter     Roll 10m

    profile: 2.5 x 6.0 cm     side length 25 - 400 cm     custom formats upon request     `sharp edge' upon request The 2560 has a profile of  2.5 x 6.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 25 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/wedges-big-beech/keys-50pcs.?number=10939 If you require an additional bracing, please combine the frame with the cross bars K60: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/30/cross-brace-k60?number=10030 The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). The length of the center element should correspond to the length of the sidebar. Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

The twill weave is characterised by the diagonal, parallel lines (twill ridge) formed by the juxtaposition of the binding points (crossing points of warp and weft). This fabric shows a clear diagonal twill structure on one side and is rather fine on the other. Cotton with twill weave is suitable for all formats, especially for large formats. weight: 380g / m² width: 1.60 m (plus edge) cotton 100% price per running meter      

Linen weave is the simplest and certainly the oldest weave: yarns of the same size are woven together in warp and weft direction. The result is an even grid that looks the same from the right and left. Due to its long fibres, linen is extremely tear-resistant. High air permeability and absorbency are just a few of the many properties of these fabrics.     100% linen     weight: 420 g/m²     width: 2,10 m (plus edge)     medium-coarse     dense fabric     calendered finish ( a process used to smooth a material)    price for running meter    

    from 50 cm lengthone slit,   i.e. a middle bars or a cross: from 2 m lengthtwo slots,i.e. two middle bars per side or a double double cross:         Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there.    

The twill weave is characterised by the diagonal, parallel lines (twill ridge) formed by the juxtaposition of the binding points (crossing points of warp and weft). This fabric shows a light diagonal twill structure on both sides.Cotton with twill weave is suitable for all, especially large formats. weight: 260g / m² width: 1.64 m (plus edge) 100 % cotton price per running meter      

The nettle cloth is a thin cotton fabric and is best suited for small and medium formats.     Weight: 200 g/m2     Width: 2,20 m (plus edge)     Price per running meter    Balle 30 m

    weight after priming: 330 g/m²     width: 2.10 m (plus edge)     10m Roll     medium-fine     double primed with slightly absorbent universal primer     brown backside     100% cotton     very good quality and resistance     traditional grain        suitable for oil, acrylic, tempera and gouache     one of the most popular canvas on the market because of best price/performance ratio     price per running meter

The nettle cloth is a thin cotton fabric and is best suited for small and medium formats.     Weight: 160 g/m2     Width: 1,65 m (plus edge)     100% cotton     Price per running meter    Roll 30 m

weight after priming: 330g/m² width: 2.10 m (plus edge) medium-fine primed with slightly absorbent universal primer 100% cotton suitable for oil, acrylic, tempera and gouache price per running meter 10m Rolls

   The middle bars 2560 are suitable for stretcher frames 2560. Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there. The length of the central element should correspond to the length of the side strips. Example: for a frame measuring 100x100 cm, you need two central pieces measuring 100 cm (simple cross).