Printmaking

AMI Linoleumplatte Profil 3.2mm

Product information "AMI linoleum plate profile 3.2mm"Linoleum plate First-class linoleum plate with spun fabric backing and matt surface, soft and easy to work with. Profile: 3.2mm / available in A2, A3, A4, A5

From €3.00*

Details

AMI Linoldruckfarbe

Product information "AMI linoleum printing ink" Linotype printing ink. High-quality water-based printing ink with a high pigment content and good opacity. All colors are highly lightfast and can be mixed with each other. Use water to clean work equipment

Content: 0.25 Piece (€43.60* / 1 Piece)

From €10.90*

Details

Lascaux Siebdruckpaste (2049)

Lascaux screen printing paste is added to the Lascaux paints and gives a non-toxic, aqueous system for screen printing. The screen printing paste acts as a retarder and can also be used in painting. The drying of the paint is slowed down and the cleaning of the sieves is facilitated.characteristicspastos, colorless, matt compatible with all Lascaux color lines, media and transparent lacquers solvent-free gives the colors optimum consistency for screen printing extends the open time no change in color depth, color intensity and light fastness simplest processing, meets the highest pressure standard.

Content: 0.5 Piece (€43.78* / 1 Piece)

From €21.89*

Details

CLP-/REACH-Notice

Symbol

Exclamation Mark: Health hazard/Hazardous to the ozone layer

Signalword

Attention!

Hazard Statements

EUH208: Contains . May produce an allergic reaction.

H319: Causes serious eye irritation.

Precautionary statements

P264: Wash thoroughly after handling.

P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.

P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337 + P313: If eye irritation persists: Get medical advice/attention.

Gamblin Portland Litho Black 454g

Product information "Gamblin Portland Litho Black 454g" Portland Litho Black is an artist quality lithography ink. This ink reflects the way we make all our products at Gamblin, focusing on high quality oil and high pigment content. Its body is very different to process black inks as we know that hand printing is slow and gentle and requires a true, rich black. We strive for simplicity in the formulation of our materials, finding the perfect balance between the appropriate pigments and carefully selected oils. This makes our ink feel different to commercial inks from a can. Portland Litho Black has been used for both plate and lithographic printing and we are delighted to add it to our growing collection of oil based inks. Portland Litho Black is available in the following size: 1 pound can Pigment: Ivory Black PBk7, Carbon Black PBk9 SDS

Content: 0.454 Kilogramm (€70.48* / 1 Kilogramm)

€32.00*

Gamblin Burnt Plate Oil 237ml

Product information "Gamblin Burnt Plate Oil 237ml" Burnt plate oils are used to lower the viscosity of the ink. Burnt plate oil should only be added sparingly to inks as the details of a print can be lost if the ink becomes too runny.Burnt Plate Oil #000 (SDS) has a lower tack and is a good fit for use with Gamblin Relief Inks. Burnt Plate Oil #2 (SDS) has a higher tack and is the primary oil binder for Gamblin Etching Inks

Content: 0.237 Piece (€43.42* / 1 Piece)

From €12.50*

Details

Lascaux Screen Filler 500ml (18010)

Product information "Lascaux Screen Filler 500ml (18010)"Lascaux Screen Filler is a quick-drying masking medium for creating waterproof, durable stencils. Screen Filler effectively seals the screen and can be easily removed from the screen after printing. Stencils with Screen Filler are durable and remain in place even after long printing processes. Propertiesquick-drying and durable waterproof water-dilutable, solvent-free seals the screen effectively easily recognizable in the screen as it is colored

Content: 0.5 Piece (€71.78* / 1 Piece)

€35.89*

Lascaux Screen Painting Fluid 500ml (18011) Sieb-Malmittel

Product information "Lascaux Screen Painting Fluid 500ml (18011) Screen Painting Medium" Screen Painting Fluid is a delayed-dissolving masking medium for screen printing. This ready-to-use, water-soluble screen painting medium dries quickly to form water-soluble stencils, effectively seals the screen and is easily recognizable in the screen. Properties quick-drying water-dilutable solvent-free easily recognizable in the screen as it is colored can be easily removed with warm soapy water

Content: 0.5 Piece (€56.58* / 1 Piece)

€28.29*

Details

AMI Soft Farbwalze

Product information "AMI Soft Paint Roller" AMI Soft Paint Roller The rubber paint roller is also suitable for relief work thanks to its soft surface. The robust construction made of polypropylene and aluminum promises a long service life and comfortable handling. To avoid contact with the surface between applications, the damp roller can be placed on its back. Fresh paint residues can be removed very easily from the smooth surface.

From €11.50*

Details

AMI Handdruckwalze

Product information "AMI hand pressure roller" Hand pressure roller 5cm. Sturdy roller made of black hard rubber with a wooden handle.

From €11.00*

Details

Schmincke Aqua Linoldruck

Finest aqua LINOPRINT colours, series 19 15 brilliant colours + 3 effect colours (gold, silver, copper) 4 special mediums + 1 universal fixative Water-based + natural binder (gum arabic) Best lightfastness (at least 4-5 stars) For prints with even, sharp contours High colour depth and good mixability Available in 35 ml tubes (15 + 3 effect colours), 120 ml tubes (17 colours), 250 ml bottle (7 colours) and ivory black in 1 liter The extensive variations of lino and material printing provide artists and creative people with many design possibilities. All 15 colours and 3 effect colours are formulated on a gum arabic base. They contain high-quality organic and inorganic pigments and are characterised by particularly good lightfastness (at least 4-5 stars) and a unique depth of colour. All colours can be used directly, can be mixed with each other and thinned with water. The optimum open times allow perfect finish, the print has sharp contours and an even result. The aqua LINOPRINT colours dry within 15 minutes to be wipe-proof but not waterproof and can be overprinted if necessary.

Content: 0.035 Piece (€194.29* / 1 Piece)

From €7.20*

Details

Gamblin Etching Inks 454g

Gamblin Etching Inks Gamblin Etching Inks were formulated at the request of professional printmakers in the Pacific Northwest who wanted strong reliable inks for edition printing. The palette of pure intense pigments offers a broad range of color mixing potential. Five black inks and Graphite were formulated to meet the demands of printmakers who want deep rich black inks with good working characteristics. Portland Black and Portland Cool Black are ideal for edition printing; both offer a strong line and medium plate tone. For engravers, printers of mezzotints, or others who need more resistance from their ink, Portland Stiff Black is also available. To read more about selecting the Black ink most suited to your printmaking process, read our latest newsletter here. Gamblin Etching Inks are all bound in the highest quality Burnt Plate Oil.

Content: 0.453 Kilogramm (€43.47* / 1 Kilogramm)

From €29.90*

Details

Speedball Linolium Cutter Set

Product information "Speedball Linolium Cutter Set" Speedball Linoleum Cutter Assortment #1 Includes (1) Red Linoleum Handle and (1) each of: #1, #2, #3, #5, #6 Linoleum Cutters Made from high quality steel, Speedball® Linoleum Cutters are hand ground and feature edges ideal for cutting soft or hard substrates.

€24.30*

Gamblin Magnesium Carbonate 100g

Magnesium Carbonate is traditionally used to stiffen ink. It will also reduce an ink's gloss level. Once added to ink, Magnesium Carbonate becomes transparent and will not alter the color of the ink. We recommend adding small amounts at a time; little is needed to add body to an ink. Mix well. It can be used with both Etching and Relief Inks. SDS

Content: 0.1 Kilogramm (€136.00* / 1 Kilogramm)

€13.60*

Gamblins and Tom Hucks Outlaw Black Relief Ink 300 ml

Product information "Gamblins and Tom Hucks Outlaw Black Relief Ink 300 ml" Formulated in collaboration with Tom Huck of Evil Prints: http://www.evilprints.com/ Developed in collaboration with Tom Huck of Evil Prints: http://www.evilprints.com/ - Colourfast - Intense, stiff, rich, cool black - Designed for printing blocks with high levels of detail - Pure burnt linseed oil base, - No fillers, additives or modifiers

Content: 0.3 Piece (€85.00* / 1 Piece)

€25.50*

Details

AMI Linoldruckfarbe METALLIC 80 ml

Product information "AMI linoleum printing ink METALLIC 80 ml" Linotype printing ink. High-quality water-based printing ink with a high pigment content and good opacity. All colors are highly lightfast and can be mixed with each other. Use water to clean work equipment

Content: 0.08 Piece (€1,123.13* / 15 Piece)

From €6.40*

Details

Golden Silkscreen Medium (3690)

PRODUCT DESCRIPTION GOLDEN Silkscreen Medium is a water-borne system designed to blend with acrylic paints for silk-screen application onto paper, wood and other suitable fine art materials. This product is designed to increase working time and prevent paint from drying in the screen too quickly. NOTE: GOLDEN Silkscreen Medium is NOT intended for use on fabrics to be laundered. Use GOLDEN Silkscreen Fabric Gel for such purposes. PRODUCT APPLICATION Mixing Information Although any addition of GOLDEN Silkscreen Medium will increase the open time1 of a paint, a good starting point is to blend even parts of paint and medium. Higher levels of the medium will increasingly affect the transparency, but also will increase the open time. Lower levels of Silkscreen Medium produce mixes with the greatest opacity2, but that are more likely to clog in the screen. Mixing With Other GOLDEN Products GOLDEN Silkscreen Medium can be blended with any of the GOLDEN Acrylic paint lines, Gels and Mediums to lengthen the working (open) time for silk-screening. It is a pourable blend of acrylic, retarder & water that, unlike retarder alone, will form a film, thereby increasing durability and thinning the paint while retarding the drying time. Transparency/Opacity Silkscreen Medium is not designed to impart opacity. The opacity of the mixture will be determined by the nature of the color being used and the ratio of paint to medium used. Higher levels of the Silkscreen Medium will be increasingly more transparent. Adding GOLDEN Titanium White to a mixture will increase opacity. Any addition of white will lower a color's chroma and value. Additionally, transparent colors, including Iridescent and Interference Colors, can be made to appear more opaque when a "base coat"3 is screened first. For example, GOLDEN Iridescent Gold will appear to have greater opacity over a buff-colored base coat. Refer to screen-printer's books and other reference material for further suggestions. (Consult GOLDEN Pigment Identification Chart to determine the opacity ratings for the various colors). General Product Information Do not mix with oils. Paint on any non-oily surface. Abrade non-absorbent surfaces for increased adhesion. Minimum film formation temperature is 49oF/9oC. Avoid freezing. Clean screens/tools with soap and water. Safe to use with minimal odor. ADDITIONAL INFORMATION Thickness Considerations Thickness, also termed "viscosity," can greatly influence how a printing ink performs. Thinner inks have a greater risk of "bleeding" into the paper or other porous substrates, but perform well on tighter mesh screens and dry quickly on absorbent substrates like paper. Thick, pasty mixes have a higher tendency to clog tighter mesh screens, but can offer increased opacity (due to a thicker film) and are less likely to bleed when screened onto fabrics. These considerations should be addressed before beginning large printing runs. Choosing a line of GOLDEN Acrylic Paints to use with the Silkscreen Medium depends on the thickness needed for a particular job. GOLDEN Heavy Body Acrylics have a buttery viscosity and will therefore make thicker screening inks. GOLDEN Fluid Acrylics have the same pigment load as our Heavy Body Paints, but are the consistency of heavy cream, and are quite pourable. Mixtures with Silkscreen Medium will remain thin and pourable. Improving Working Time While Silkscreen Medium dramatically helps to prevent paint from drying in the screen, it does not eliminate the possibility. As soon as a clog becomes apparent, it should be removed with a damp cloth. If the clog is allowed to dry in the screen, it will be extremely difficult to remove. For multiple clogs that develop, stop printing and thoroughly clean screen with water, using a non-abrasive sponge or cloth to remove the clogs. Pat the screen dry and continue printing. Work quickly, with minimal time between prints. Have screening inks pre-made in sufficient quantities before beginning screening. To maximize open time, add 5 - 15% GOLDEN Retarder to the GOLDEN Silkscreen Medium/Paint mixture. This will increase the open time, but not dramatically alter the opacity. It is beneficial to pre-wet the screen with a water/Retarder mixture (1:1) before screening. Keep a plant mister bottle filled with this mixture at hand, and lightly spray the screen periodically to prevent paint from drying. Avoid excessive misting, as this can cause bleeding on the paper.

Content: 0.237 Piece (€54.43* / 1 Piece)

From €16.75*

Details

LINO Cutting & Printing Kit

LINO Cutting & Printing Kit This comprehensive kit includes a wide selection of tools and materials for Lino cutting and printing. You can experiment with artisan printing techniques and compare traditional lino and the new Softcut materials, which add new possibilities for beginners and experienced users alike. The 6 different lino cutters allow varied carving styles, whilst the safety cutter and hand guard ensure safe working for younger or less experienced users. The 3-in-1 Baren is a tool for transferring ink from your lino block to paper, but can also be used as a desk tidy for your cutters and as a stamping tool when used with the included self-adhesive Softcut™ discs. You can make many prints with the water based ink whilst keeping your work space clean with the handy ink tray. This educational and fun kit is ideal for making unique greeting cards, gifts, posters or even great works of art! Full instructions are included. Recommended Age: 12 and up with adult supervision.

€45.50*

Details

Pentart Transfer Pen

Product information "Pentart Transfer Pen" Transfer Sift Contents: 10 ml A solvent-based solution suitable for transferring laser-printed images onto smooth, porous surfaces. The pen allows for easy, quick and precise transfers, perfect for working on smaller, fine patterns. Place the image with the printed side on the surface. The text must be mirrored beforehand. Gently paint over the image from the back with the pen. Then wipe/rub the relevant areas with a wooden spatula or metal spoon using light pressure.

€5.00*

Details

CWA Brayer

Product information "CWA Brayer" Brayer - Printing roller The roller has a metal axle and is mounted in a metal frame. This allows the brayer to roll smoothly and is easy to clean. Protect the surface of your brayer from damage by storing it with the roller facing up, as shown in the photo. We designed the flat gray edge specifically for this.

From €16.00*

Details

Permaset AQUA screen print ink

PERMASET AQUA®- a water-based, environmentally friendly and solvent-free screen printing ink for natural and synthetic textiles - a revolution among screen printing colors. Selected pigments provide an intense, luminous opaque color. Thanks to a novel polymer that binds the pigment to the fabric, it provides an exceptionally soft feel while being particularly wash and abrasion resistant and even suitable for dry cleaning. The ink colours have a light fastness of at least 6/8 on the blue wool scale - most colours even received an 8/8 rating.Can also be used on paper, linoleum, wood, model printing and other non-porous surfaces.Available in normal opaque / transparent (Permaset Aqua) and opaque / high opaque (Permaset Aqua SuperCover) with particularly good opacity on dark substrates, four metallic effect colours and eight luminous colours and as screen printing paste.Permaset Permatone has received Soil Association approval in the UK after successfully meeting the requirements of the Global Organic Textiles Standards (GOTS) for inorganic chemical raw materials for use in organic textile processing.Registration certificate of the soil association: https://www.permaset.com.au/why-water-based-inks/permaset-aqua/Specialty products: PHOSPHORESCENT GREEN: Enables a "Luminance in the Dark" effect. PERMA PUFF: Heat activated 3D effect. Can be used with standard colours or with pigment concentrates The Permaset Foil FX series: consists of 4 glossy metallic colours (silver, gold, copper and blue) most effective on dark backgrounds, but also on white or light backgrounds interesting visual effects can be achieved Due to the large grain size, a "normal" 43T (110 tpi) network cannot be used. A more wide-meshed net such as 20 or 22T (50-55 tpi) is required. Due to the grain size, abrasion resistance and washfastness are not given White tones: STANDARD WHITE particularly opaque due to high titanium dioxide content, but slightly less soft to the touch. SUPERCOVER WHITE is an opaque opaque white. It has the highest content of titanium dioxide pigments and binders for use on dark pigments. Excellent opacity in a water-based ink FIRST DOWN WHITE is used by professional printers as a base for printing on dark fabrics to obtain brilliant colors with a soft feel.

Content: 0.3 Piece (€40.67* / 1 Piece)

From €9.76*

Details

Permaset Permaprint PREMIUM screen print color

Permaprint Premium is a 100% solvent free environmentally friendly water- based printing product that provides intense pigments rich in coverage with exceptional colour yield. The resilient resin base is at once both soft and incredibly strong – holding up beautifully to even the most severe rub and wash tests. Permaprint Premium has been formulated to be free of toxic chemicals. The range is water based, thus has no flash point and as such is exempt from flammable Liquids regulations. Permaprint Premium is also free from Lead and other heavy metals, so it’s not only safe for the environment and the printer, but ensures equipment can be easily cleaned with water and solvent fumes are eliminated. Permaprint Premium is ideal for printing on: sealed paper cardboard polyesters (mylar) polycarbonate plastics some coated metals care should be taken with some vinyls as plasticizer migration may soften the ink over time and also with some uncoated papers as cockling may occur suitable for use on high lay-down hand printed wallpaper and art reproduction, through to stickers, posters and backlit displays

Content: 0.3 Piece (€53.00* / 1 Piece)

From €12.72*

Details

Rohrer and Klingner Lithographietusche (29400)

Product information "Rohrer and Klingner lithography ink (29400)"Liquid and stick ink (29400) for marking stone, aluminum and zinc plates with a high etching resistance. They are composed of the proven components shellac, wax and soap and the high-quality soot used is finely dispersed.Liquid inks are suitable for opaque surfaces; stick ink (which must be rubbed on wet) for halftones and transitions. Soft to medium-hard stones with a fine grain are used for the pen technique. Drawing instruments such as drawing pens, reed pens, goose quills, drawing pens, etc. can be used.

Content: 0.1 Piece (€139.00* / 1 Piece)

From €15.80*

Details

Permaset AQUA process colours screen print ink

From €25.60* €32.00* (20% saved)

Details

Permaset Aqua Mediums

Product information "Permaset Aqua Mediums" Permaset Aqua Media PERMASET TABLE GLUE is a specially formulated pressure sensitive adhesive for fabric printing. Table Glue prevents any movement of the fabric during printing and is easily applied with a brush roller or spray. Table Glue dries quickly and provides a permanently adhesive surface suitable for use on almost any surface. SYNTHETIC FIXER An additive for Permaset printing pastes or fabric printing inks that significantly improves adhesion to substrates that would have poor adhesive properties under normal conditions. Synthetic Fixer is best suited for applications on synthetic materials such as poly/cotton blends, polyester or acrylic fibers. THICKENER is, as the name suggests, a thickener for Permaset printing pastes or fabric printing inks. By adding Permaset Tinters, water, ammonia sulfate solution, synthetic fixer or cold cure additive, the viscosity of the printing medium is reduced. A small addition of Permaset Thickener will return the print media to its original viscosity. PERMASET ANTI-BLEED ADDITIVE is another specialty product designed for applications where print “bleeding” or “hazing” is a concern. Many fabrics are pre-treated by fabric manufacturers either as part of the manufacturing process or to give the finished product a special quality. Unfortunately, this pre-treatment reacts unfavorably with the print media and results in prints that bleed or haze. Adding a small amount of Anti-Bleed Additive will give the print a firmer and more solid definition. PERMASET FABRIC SOFTENER is an additive used when a softer feel to the finished print is desired. Some fabrics require a softer print due to their delicate nature and so fabric softener is the perfect way to achieve a “softer feel.” Fabric softener can also be used in conjunction with the use of Permaset Synthetic Fixer and/or Permaset Cold Cure Additive, as these additives tend to stiffen the feel of a print.PERMASET PRINT RETARDER is designed to slow down the drying process of the Permaset product. This has the benefit of delaying the drying of the Permaset product on the screen, thus preventing screen clogging. Print retarders are also beneficial for printing, as they allow for easier separation of the screen from the print during the printing process.

Content: 0.5 Piece (€74.40* / 1 Piece)

From €14.00*

Details

Filter products