stretcher bar 2560 ( 2.5 x 6.0 cm )

Variants table
Preview	Product number	Size	Unit price	Buy

Product information "stretcher bar 2560 ( 2.5 x 6.0 cm )"

profile: 2.5 x 6.0 cm
side length 25 - 400 cm
custom formats upon request
`sharp edge' upon request

The 2560 has a profile of 2.5 x 6.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.

The stretcher frame is available from a side length of 25 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.

The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.

In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.

The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/wedges-big-beech/keys-50pcs.?number=10939

If you require an additional bracing, please combine the frame with the cross bars K60: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/30/cross-brace-k60?number=10030

The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.

Advice on bracing:
Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).

The length of the center element should correspond to the length of the sidebar.

Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

1 of 1 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

1 review

6 April 2019 12:48

Stretcher bar K60 80x80

Very good quality.

Herstellerangaben

ANDRZEJ NASKRĘT ZAKŁAD STOLARSKI

Kawczyn 46

64-000 Kawczyn

blejtramy@gmail.com

*Nach einem Klick auf das Produktlogo werden Sie automatisch zur Website des Herstellers weitergeleitet.

Accessory Items

cross brace 2560 ( 1,6 x 5,5 cm)

The middle bars 2560 are suitable for stretcher frames 2560. Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there. The length of the central element should correspond to the length of the side strips. Example: for a frame measuring 100x100 cm, you need two central pieces measuring 100 cm (simple cross).

Content: 0.3 Laufende(r) Meter (€4.70* / 1 Laufende(r) Meter)

From €1.41*

Details

Accessory Items

stretcher bar 4045 ( 4.0 x 4.5 cm )

profile: 4.0 x 4.5 cm side length 18 - 350 cm custom formats possible on request `sharp edge' possible on request The 4045 has a profile of 4.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 18 to 350 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/big-wedges/keys-beech-50-pcs. If you require an additional bracing, please combine the frame with the cross bars K 45: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/12/cross-brace-k45-and-k40?number=10012The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 60cm no middle bars are needed. If one side length exceeds 60cm, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). The length of the center element should correspond to the length of the sidebar. Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

Content: 0.2 Laufende(r) Meter (€5.45* / 1 Laufende(r) Meter)

From €1.09*

Details

stretcher bar K2065 ( 2.0 x 6.5 cm )

profile: 2.0 x 6.5 cm side length 25 - 400 cm custom formats upon request ´sharp edge´ upon request from 2 m 2-fold slit only available on order, e.g. by e-mail The K 2065 has a profile of 2.0 x 6.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 25 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/wedges-big-beech/keys-50pcs.?number=10939 If you require an additional bracing, please combine the frame with the cross bars K2065: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/2342/stretcher-bar-k60?number=12239 The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). Please select the appropriate number of middle bars.

Content: 0.25 Laufende(r) Meter (€3.64* / 1 Laufende(r) Meter)

From €0.91* €1.19* (23.53% saved)

Details

stretcher bar 2035 ( 2.0 x 3.5 cm )

profile: 2.0 x 3.5 cm side length 15 - 160 cm custom formats possible on request `sharp edge' possible on request The 2035 has a profile of 2.0 x 3.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 15 to 80 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge of 5 euros per bar.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/910/wedges-standard-pine/keys-100pcs?number=10864 If you require an additional bracing, please combine the frame with the cross bars K35: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/34/keilrahmen-mittelstueck-k35-1-8x3-5cm?number=10034The stretcher frame has a 1-fold slit from a side length of 50 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross).

Content: 0.15 Laufende(r) Meter (€1.87* / 1 Laufende(r) Meter)

From €0.28*

Details

Tip

stretcher bar 2045 ( 2.0 x 4.5 cm )

profile: 2.0 x 4.5 cm side length 15 - 300 cm custom formats possible on request `sharp edge' possible on request The 2045 has a profile of 2.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 15 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/910/standard-wedges/keys-pine-50-pcs If you require an additional bracing, please combine the frame with the cross bars K 45: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/12/cross-brace-k45-and-k40?number=10012The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 50cm no middle bars are needed. If one side length exceeds 50cm, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).

Content: 0.15 Laufende(r) Meter (€2.73* / 1 Laufende(r) Meter)

From €0.41*

Details

stretcher bar 4570 ( 4.5 x 7.0 cm )

profile: 4.5 x 7.0 cm side length 30 - 500 cm custom formats upon request sharp edge as standard from 3 m 3-fold slotted, from 4 m 4-fold slotted The 4570 has a profile of 4.5 x 7.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 30 to 500 cm. On request we can produce stretcher bars in any length, the production time is usually 7-10 days. Questions about custom size bars please send by email.The stretcher frame has a sharp edge as standard.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/918/wedges-big-k70/keys-50pcs.?number=10872 If you require an additional bracing, please combine the frame with the cross bars 4570: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/17/cross-brace-for-k70-and-k6570-7-0x4-5cm?number=10017 The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm, a 2-fold slit from a side length of 200 cm, a 3-fold slit with a side length of 300 cm and a 4-fold slit from a side length of 400 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). With this profile, bars are triple slotted over 3m length and quadruple slotted over 4m length. Please select the appropriate number of middle pieces. The length of the center element should correspond to the length of the sidebar. Example: for a frame measuring 100x100 cm you need two center pieces in size 100 cm (simple cross).

Content: 0.3 Laufende(r) Meter (€17.27* / 1 Laufende(r) Meter)

From €5.18*

Details

stretcher bar 2845 (2.8 x 4.5 cm)

profile: 2.8 x 4.5 cm side length 20 - 300 cm custom formats possible on request `sharp edge' possible on request The 2845 has a profile of 2.8 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 20 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please orderhttps://peters-art.de/en/Painting-Supports/Stretchers/Wooden-Stretchers/910/STANDARD-wedges/keys-pine-50-pcsIf you require an additional bracing, please combine the frame with the cross bars K30: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/32/keilrahmen-mittelstueck-k30-1-8-x-4-5cm?number=10032The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).The length of the middle bar should correspond to the length of the side strips. Example: for a frame measuring 100x100 cm, you need two middle bars measuring 100 cm (simple cross).

Content: 0.2 Laufende(r) Meter (€4.25* / 1 Laufende(r) Meter)

From €0.85*

Details