profile: 6.5 x 7.0 cm     side length 70 - 400 cm     custom formats upon request     sharp edge as standard     from 3 m 3-fold slotted, from 4 m 4-fold slotted Production on special order: info@peters-art.deWaiting time 7-14 days. The K 6570 has a profile of 6.5 x 7.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 70 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a sharp edge as standard.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/918/wedges-big-k70/keys-50pcs.?number=10872 If you require an additional bracing, please combine the frame with the cross bars K6570: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/17/cross-brace-for-k70-and-k6570-7-0x4-5cm The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm, a 2-fold slit from a side length of 200 cm, a 3-fold slit with a side length of 300 cm and a 4-fold slit with a side length of 400 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). With this profile, bars are triple slotted over 3m length and quadruple slotted over 4m length. Please select the appropriate number of middle pieces.    

Beech wood wedges 4000 pieces Suitable for stretcher frames 2845, 4045, 2560, 2065 and center piece 2770 Dimensions: 60 x 20 x 3mm

TRY OUT Hier bieten wir euch komplette Rahmensätze an, je nachdem mit und ohne Mittelstücke, Kreuz oder Doppelkreuz. Klasse C-Ware

Unsere Dreiecke werden aus Tischlerplatte* hergestellt. Der Rahmen ist insgesamt 18 mm Tief, 12 mm Rahmenstärke plus 5 mm Kante.  *Tischlerplatte ist aufgrund seiner geringen Rohdichte sehr leicht und selbst bei schwankenden Klimaeinflüssen formstabil, biegesteif und besitzt ein hohes Stehvermögen, d.h. verformt sich nur wenig.

    profile: 10.0 x 7.0 cm     side length 100 - 500 cm     custom formats upon request     sharp edge as standard     from 3 m 3-fold slotted, from 4 m 4-fold slotted The K 10070 has a profile of 10.0 x 7.0 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 100 to 500 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a sharp edge as standard.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/918/wedges-big-k70/keys-50pcs.?number=10872 If you require an additional bracing, please combine the frame with the cross bars K70: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/17/cross-brace-for-k70-and-k6570-7-0x4-5cm?number=10017 The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm, a 2-fold slit from a side length of 200 cm, a 3-fold slit with a side length of 300 cm and a 4-fold slit from a side length of 400 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). With this profile, bars are triple slotted over 3m length and quadruple slotted from 4m length. Please select the appropriate number of middle bars.    

Our new stretcher bar innovation: the Museo 65 has a profile of 65 x 44 mm and is almost distortion-free thanks to multiple gluing.The recipe for success lies in the use of first-class materials and processing techniques. For the stretcher bar we use seasoned and kiln-dried 100% PEFC-certified pine wood. The wood is double laminated to protect it from absorbing humidity from the air and finger-jointed to prevent the natural tendency of the wood to warp.The 10 mm high edge guarantees a large distance between the screen and the last surface. The reinforcing cross is placed quite far back so that there is also a large distance to the screen.The stretcher frame is available from a side length of 20 to 600 cm. We are happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the centre pieces must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible for an extra charge of 5 euros per bar.If you wish a bracing, please combine the frame with the cross brace K60 https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/30/cross-brace-k60?number=10030 The stretcher bar has a 1-fold slit ex works from a side length of 60 cm to a side length of 195 cm and a 2-fold slit up to a side length of 300 cm.The hardwood wedges required for wedging (2 pieces per bar) are not included in the price. Please order https://peters-art.de/de/malgruende/keilrahmen/holz-keilrahmen/991/keile-gross-buche-50-stueck?number=10939=10939     profile of 65 x 44 mm     virtually distortion- free     extremely stable     has a 3D effect     high distance to the stretcher bar surface thanks to high edge     side length 20 - 600 cm possible     custom formats possible     `sharp edge' possible     PEFC-certified pine wood Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).     1 m to 2 m = 1 middle bar     2.1 m to 3 m = 2 middle bars     3.1 m to 4 m = 3 middle bars

4570 Connectors for extended lengthsThe stretcher frame 4570 is available from a side length of 30 to 500 cm, if you want to work with a length of more than 5 m you need the connecting piece offered here.With the connection made of aluminium, 2 strips are combined to an extended length. One connecting piece is necessary for the strecher bars. To extend a cross brace, 2 connectors are required, because they are installed on both sides. (see picture)

Profile: 3.3 x 4.5 cm, side length 30 – 200 cm, cut to custom sizes available, "sharp edge" available. The K 33 has a profile of 3.3 x 4.5 cm. For the stretcher frame, we use aged and kiln-dried pine wood. The wood is finger-jointed to prevent natural warping tendencies and is virtually warp-free thanks to multiple gluing – a high-quality handmade product at an exceptionally low price. The stretcher frame is available with a side length ranging from 30 to 200 cm.We are happy to cut the frame to your desired size for an additional charge of 5 euros per bar. Please note that the center pieces must also be cut. The stretcher frame has a rounded edge. If you prefer a "sharp edge," this can be done for an additional charge.To assemble a stretcher frame, you need two long side bars, two shorter side bars, and possibly a center piece or cross and wedges. The stretcher frame comes with a single slot from a side length of 50 cm up to a side length of 195 cm, and a double slot from a side length of 200 cm.For side lengths under 60 cm, no center piece is needed; if the side length exceeds 60 cm, one center piece for the shorter side is sufficient. If both sides are longer than 60 cm, you need one center piece per side (i.e., a simple cross). If a side exceeds 2 meters, you will need two center pieces for the shorter side and one for the longer side (simple double cross). If both sides are over 2 meters, the bars are double-slotted, so you will need two center pieces for each side (double double cross).